 |
Roadway Drainage Calculations |
|
 |
|
Inlet Spacing Charts
|
|
|
GEOPAK Drainage |
|
|
Bridge Sized and 48” and Larger Culverts Sheets |
|
|
HY8 Program
|
|
Storm Sewer Support Files
Inlet Spacing Charts
These charts aid in spacing catch basins on curbs for applications where only roadway drainage is considered. They also take into account maximum ponding and 100% interception.
|
|
|
GEOPAK Drainage
GEOPAK Specification Support Manual
The GEOPAK Specification Support Manual explains the step-by-step procedure to complete a storm sewer design utilizing GEOPAK Drainage 2004. All standards and conventions are explained as well as descriptions of output reports to be submitted after the design is complete.
|
|
Cell Library
The Microstation V8 cell library was created for use with GEOPAK Drainage 2004. This file requires Microstation 08.05.02.27 Windows x86 or newer and Bentley GEOPAK 2004 Edition – Version 08.05.02.35 or newer to operate. GEOPAK Drainage 2004 is a subprogram of Bentley GEOPAK 2004 and cannot function without another subprogram GEOPAK Road 2004. Bentley GEOPAK 2004 runs inside of Microstation V8; therefore, both programs are required.
|
|
Drainage Library
The Drainage Library is the English library for GEOPAK Drainage 2004 that references the cell file described above and the .ddb file that is maintained by the SCDOT Road Design section. The library file was created inside of GEOPAK Drainage 2004 and requires Microstation 08.05.02.27 Windows x86 or newer and Bentley GEOPAK 2004 Edition – Version 08.05.02.35 or newer to operate. GEOPAK Drainage 2004 is a subprogram of Bentley GEOPAK 2004 and cannot function without another subprogram GEOPAK Road 2004. Bentley GEOPAK 2004 runs inside of Microstation V8; therefore, both programs are required.
|
|
Output Files
To create our standard output files for GEOPAK Drainage 2004, you will need the following files. The .drf files are needed to generate the .csv files. This data is copied into the blank EXCEL files that contain the standard information in the preferred format that we require to be submitted after the design is complete. Drainage_report.xls is the macro that you will need for the quantity summary reports. See the GEOPAK Specification Support Manual for a complete explanation of the files and how each is utilized.
The .drf files were generated inside of GEOPAK Drainage 2004 and requires Microstation 08.05.02.27 Windows x86 or newer and Bentley GEOPAK 2004 Edition – Version 08.05.02.35 or newer to operate. GEOPAK Drainage 2004 is a subprogram of Bentley GEOPAK 2004 and cannot function without another subprogram GEOPAK Road 2004. Bentley GEOPAK 2004 runs inside of Microstation V8; therefore, both programs are required.
The EXCEL files were created in Microsoft EXCEL 2000. The macro was written in Visual Basic.
|
Back to Top
|
Culvert Support Files
Bridge Sized and 48" and Larger Culverts
The spreadsheets below are standard submittals for specific circular culverts and all box and arch culverts. They were written in Microsoft EXCEL 2000.
|
|
|
HY8 Program
The Federal Highway Administration website provides a download for the HY8 culvert design and analysis programs. You can also download the Hydraulic Design of Highway Culverts manual, which is the basis for HY8.
|
Federal Highway Administration
|
Back to Top
|
|
|
|
|
| For additional
information or to order, send a written request, including
name, address, and payment if required, to: South
Carolina Department of Transportation
Engineering Publication Sales, Room G-19B
Post Office Box 191
Columbia, South Carolina 29202-0191
Telephone: (803)737-4533
Fax: (803)737-4530
e-mail:
engrpubsales@scdot.org
|
|
| Items may be
purchased over-the-counter at the Engineering Publication
Sales Center, Room G-19B (basement level) in the SCDOT Headquarters
Building, 955 Park Street, Columbia, South Carolina.
SCDOT will accept cash, check (make
payable to SCDOT), money order (make payable to SCDOT),
and credit card (Visa & Mastercard only). Payment
must be received before items can be shipped.
|
|
|
|
Related
Topics |
|
The Highway
Design Manual assists technicians and engineers in selecting
the needed design criteria in preparing plans for SCDOT
construction projects.
|
|
|
